Mga produkto
High precision raw pure tungsten cemented carbide bar carbide polished rods
Panimula ng Produkto
Tungsten Carbide ay madalas na tinutukoy bilang isang Hard Metal dahil sa ito ay napakataas na tigas na may kaugnayan sa iba pang mga metal.Karaniwan ang isang Tungsten Carbide ay maaaring magkaroon ng hardness value na 1600 HV, samantalang ang mild steel ay nasa rehiyon ng 160 HV na isang factor na 10 mas mababa.Ang Tungsten Carbide Rods ay ginagamit para sa pagputol ng aluminum alloy, cast iron, stainless steel, refractory alloy steel, nickel based alloy, titanium alloy at nonferrous na metal.Sa ilang taon na pag-unlad, sa aming magandang kalidad at mapagkumpitensyang presyo, ang aming mga produkto ay malawak na kinikilala ng mga pandaigdigang gumagawa ng mga cutting tool.
Mga kalamangan
1. Sertipikasyon ng ISO 9001:2015
2. Gumamit ng 100% tungsten carbide raw material
3. Advanced na teknolohiya, awtomatikong pagpindot, HIP sintering
4. may higit sa sampung taong karanasan
5. At katumpakan paggiling
6. ang tolerance ng polish at ground ay maaaring +0.005/-0.005mm
7. Buong kakayahang tumanggap ng mga order ng OEM at ODM
8. Mahigpit na kontrol sa kalidad at pagkakapare-pareho ng kalidad.
9. Mahigpit na inspeksyon para sa kalidad ng hilaw na materyales at mga natapos na produkto
Application
detalye ng Produkto
Panimula ng Materyal
| Grade Introduction sa Carbide Rods | |||||||
| Grade | Co% | Laki ng butil ng WC | HRA | HV | Densidad (g/cm³) | Lakas ng baluktot（MPa) | Katigasan ng bali（MNm-3/2) |
| KT10F | 6 | Submicron | 92.9 | 1840 | 14.8 | 3800 | 10 |
| KT10UF | 6 | superfine | 93.8 | 2040 | 14.7 | 3200 | 9 |
| KT10NF | 6 | nanometer | 94.5 | 2180 | 14.6 | 4000 | 9 |
| KT10C | 7 | ayos lang | 90.7 | 1480 | 14.7 | 3800 | 12 |
| KT11F | 8 | Submicron | 92.3 | 1720 | 14.6 | 4100 | 10 |
| KT11UF | 8 | superfine | 93.5 | 1960 | 14.5 | 3000 | 9 |
| KT12F | 9 | superfine | 93.5 | 1960 | 14.4 | 4500 | 10 |
| KT12NF | 9 | nanometer | 94.2 | 2100 | 14.3 | 4800 | 9 |
| KT15D | 9 | Submicron | 91.2 | 1520 | 14.4 | 4000 | 13 |
| KT15F | 10 | Submicron | 92.0 | 1670 | 14.3 | 4000 | 11 |
| KT20F | 10 | Submicron | 91.7 | 1620 | 14.4 | 4300 | 11 |
| KT20D | 10 | Submicron | 92.0 | 1670 | 14.3 | 4500 | 11 |
| KT25F | 12 | superfine | 92.4 | 1740 | 14.1 | 5100 | 10 |
| KT25EF | 12 | superfine | 92.2 | 1700 | 14.1 | 4800 | 10 |
| KT25D | 12 | superfine | 91.5 | 1570 | 14.2 | 4200 | 13 |
| KT37NF | 15 | nanometer | 92.0 | 1670 | 13.8 | 4800 | 10 |
Mga Karaniwang Sanggunian
| Solid Carbide Rods (Buong haba) | |||||
| Nominal na Dia | D(mm) | D(mm) | Ang haba | Remarks | |
| D (mm) | Un-ground | h6 | mm | ||
| 0.5 | 0.7 | 0.5 | 310-330 | ||
| 0.8 | 1 | 0.8 | 310-330 | ||
| 1 | 1.2 | 1 | 310-330 | ||
| 1.5 | 1.7 | 1.5 | 310-330 | ||
| 1/16" | 1.5875 | 1.8 | 1.5875 | 12" -13" | laki ng pulgada |
| 2 | 2.2 | 2 | 310-330 | ||
| 2.35 | 2.55 | 2.35 | 310-330 | ||
| 3/32" | 2.38 | 2.6 | 2.38 | 12" -13" | laki ng pulgada |
| 2.5 | 2.7 | 2.5 | 310-330 | ||
| 3 | 3.2 | 3 | 310-330 | ||
| 1/8" | 3.175 | 3.4 | 3.175 | 12" -13" | laki ng pulgada |
| 3.5 | 3.7 | 3.5 | 310-330 | ||
| 5/32 | 3.968 | 4.2 | 3.968 | 12" -13" | laki ng pulgada |
| 4 | 4.2 | 4 | 310-330 | ||
| 4.5 | 4.5 | 310-330 | |||
| 3/16" | 4.7625 | 5 | 4.762 | 12" -13" | laki ng pulgada |
| 5 | 5.2 | 5 | 310-330 | ||
| 5.5 | 5.7 | 5.5 | 310-330 | ||
| 6 | 6.2 | 6 | 310-330 | ||
| 1/4" | 6.35 | 6.6 | 6.35 | 12" -13" | laki ng pulgada |
| 6.5 | 6.7 | 6.5 | 310-330 | ||
| 7 | 7.2 | 7 | 310-330 | ||
| 7.5 | 7.7 | 7.5 | 310-330 | ||
| 5/16" | 7.937 | 8.2 | 7.937 | 12" -13" | laki ng pulgada |
| 8 | 8.2 | 8 | 310-330 | ||
| 8.5 | 8.7 | 8.5 | 310-330 | ||
| 9 | 9.2 | 9 | 310-330 | ||
| 9.5 | 9.7 | 9.5 | 310-330 | ||
| 3/8" | 9.525 | 9.7 | 9.525 | 12" -13" | laki ng pulgada |
| 10 | 10.2 | 10 | 310-330 | ||
| 10.5 | 10.7 | 10.5 | 310-330 | ||
| 11 | 11.2 | 11 | 310-330 | ||
| 7/16" | 11.11 | 11.3 | 11.11 | 12" -13" | laki ng pulgada |
| 11.5 | 11.7 | 11.5 | 310-330 | ||
| 12 | 12.2 | 12 | 310-330 | ||
| 12.5 | 12.7 | 12.5 | 310-330 | ||
| 1/2" | 12.7 | 12.9 | 12.7 | 12" -13" | laki ng pulgada |
| 13 | 13.2 | 13 | 310-330 | ||
| 13.5 | 13.7 | 13.5 | 310-330 | ||
| 14 | 14.2 | 14 | 310-330 | ||
| 9/16" | 14.288 | 14.5 | 14.288 | 12" -13" | laki ng pulgada |
| 14.5 | 14.7 | 14.5 | 310-330 | ||
| 15 | 15.2 | 15 | 310-330 | ||
| 15.5 | 15.7 | 15.5 | 310-330 | ||
| 5/8" | 15.875 | 16.1 | 15.875 | 12" -13" | laki ng pulgada |
| 16 | 16.2 | 16 | 310-330 | ||
| 16.5 | 16.7 | 16.5 | 310-330 | ||
| 17 | 17.2 | 17 | 310-330 | ||
| 17.5 | 17.7 | 17.5 | 310-330 | ||
| 18 | 18.2 | 18 | 310-330 | ||
| 18.5 | 18.7 | 18.5 | 310-330 | ||
| 19 | 19.2 | 19 | 310-330 | ||
| 3/4" | 19.05 | 19.3 | 19.05 | 12" -13" | laki ng pulgada |
| 19.5 | 19.7 | 19.5 | 310-330 | ||
| 20 | 20.2 | 20 | 310-330 | ||
| 20.5 | 20.7 | 20.5 | 310-330 | ||
| 21 | 21.2 | 21 | 310-330 | ||
| 21.5 | 21.7 | 21.5 | 310-330 | ||
| 22 | 22.2 | 22 | 310-330 | ||
| 22.5 | 22.7 | 22.5 | 310-330 | ||
| 23 | 23.2 | 23 | 310-330 | ||
| 23.5 | 23.7 | 23.5 | 310-330 | ||
| 24 | 24.2 | 24 | 310-330 | ||
| 24.5 | 24.7 | 24.5 | 310-330 | ||
| 25 | 25.2 | 25 | 310-330 | ||
| 1" | 25.4 | 25.7 | 25.4 | 12" -13" | laki ng pulgada |
| 26 | 26.3 | 26 | 310-330 | ||
| 27 | 27.2 | 27 | 310-330 | ||
| 28 | 28.2 | 28 | 310-331 | ||
| 29 | 29.2 | 29 | 310-333 | ||
| 30 | 30.2 | 30 | 310-334 | ||
| 31 | 31.2 | 31 | 310-335 | ||
| 1-1/4" | 31.75 | 32 | 31.75 | 12" -13" | laki ng pulgada |
| 32 | 32.2 | 32 | 310-336 | ||
| 33 | 33.2 | 33 | 310-337 | ||
| 34 | 34.2 | 34 | 310-338 | ||
| 35 | 35.2 | 35 | 310-339 | ||
| 36 | 36.2 | 36 | 310-340 | ||
| 37 | 37.2 | 37 | 310-341 | ||
| 38 | 38.2 | 38 | 310-342 | ||
| 1-1/2" | 38.1 | 38.4 | 38.1 | 12" -13" | laki ng pulgada |
| 39 | 39.2 | 39 | 310-343 | ||
| 40 | 40.2 | 40 | 310-344 | ||
| 42 | 42.2 | 42 | 310-344 | ||
